SKU: B006-B007  / 
    CAS Number: 3513-03-9

    Blasticidin S Hydrochloride ReadyMade™ Solution

    9,482,590.00Rp - 12,376,780.00Rp
    Blasticidin S Hydrochloride ReadyMade™ Solution

    Blasticidin S Hydrochloride ReadyMade™ Solution is a sterile solution of Blasticidin S Hydrochloride formulated at 10 mg/ml in 20mM HEPES buffer.

    B006: 10 x 1 ml @ 10 mg/vial for a total of 100 mg product
    B007: 20 ml @ 10 mg/vial for a total of 200 mg product

    Blasticidin is a peptidyl nucleoside produced by several species of Streptomyces that was first isolated from S. griseochromogenes in 1958.  Blasticidin S inhibits protein synthesis and is active against bacteria, fungi, nematodes, and tumor cells.  The compound is used as a selection antibiotic for both eukaryotic and prokaryotic cells, and a marker for strain manipulation.  It can also be used in genome editing using the CRISPR/Cas9 system.

    This product ships on dry ice and is subject to additional shipping fees.

     We also offer:

    • Blasticidin S Hydrochloride (B001)
    • Blasticidin S (B052)

     

    Mechanism of Action Blasticidin S Hydrochloride ReadyMade Solution inhibits protein synthesis in prokaryotic and eukaryotic cells by binding to the ribosomal P-site which strengthens tRNA binding and slows down and prevents subsequent peptide synthesis.

    Mechanisms of Resistance: Resistance to Blasticidin S is conferred by bsr, BSD, and bls resistance genes isolated from Bacillus cereus K55-S1, Aspergillus terreus, and Streptoverticillum spp, respectively.

    The bsr resistance gene is a 420 bp fragment and encodes a 15 kDa Blasticidin S deaminase which catalyzes the reaction of Blasticidin S to deaminohydroxyblasticidin S. Deaminohydroxyblasticidin S is a biologically inactive derivative of Blasticidin S and does not interact with or inhibit prokaryotic or eukaryotic ribosomes.

    The BSD resistance gene is a 393 bp fragment and also encodes a Blasticidin S deaminase enzyme which catalyzes a similar reaction to the BSR deaminase. A study by Kimura et al. found the transfection frequency with BSD to be 80X greater than with bsr when using FM3A cells.

    The bls resistance gene encodes an acetyltransferase which interacts with acetyl-coenzyme A and prevents Blasticidin S from inhibiting protein synthesis. 
    Microbiology Applications Blasticidin S Hydrochloride ReadyMade Solution can be used as a selection agent after transformation of prokaryotic (bacterial) cells, namely E. coli. Optimal Blasticidin S HCl selection concentrations range from 25 - 100 µg/mL and should be tested for each experimental condition. Selective media containing Blasticidin S HCl should contain a low salt concentration (<90mM) and pH ≤7 to avoid Blasticidin degradation.
    Eukaryotic Cell Culture Applications Blasticidin is a selection antibiotic for both eukaryotic and prokaryotic cells. Resistance to Blasticidin is conferred by the following genes:

    1) bsr (Blasticidin resistance), from Bacillus aureus, which codes for blasticidin-S deaminase.

    2) bls (Blasticidin S acetyltransferase), from Streptoverticillum spp.

    3) BSD (Blasticidin S deaminase), from Apergillus terreus.

    Researchers used Blasticin S (TOKU-E) to select for transfected AS-B145 and BT-474 cells, which are human breast cancer stem/progenitor cells, a subpopulation of cancer cells that are involved in tumor initiation, resistance to therapy, and metastasis (Lu et al, 2016). Typically, mammalian cells are sensitive to Blasticidin S HCl concentrations of 1-10 µg/ml, and bacteria to 25-100 µg/ml. Optimal selection concentration depends on the cell line, growth conditions, media, reagent quality and potency, manufacturing lot, cell density, cell metabolic rate, cell cycle phase, and plasmid properties. A kill curve should be performed for each experimental system to determine the optimal working concentration.

    For more information on relevant cell lines, culture medium, and working concentrations, please visit the TOKU-E Cell-culture Database.
    Molecular Formula C17H26N8O5 · HCl
    Documents Blasticidin Protocol.pdf|Plasmid_DNA_Transfection_Protocol.pdf|Selection_of_Stable_Transfected_Cell_Lines_Protocol.pdf
    References

    Adachi H, Hasebe T, Yoshinaga K, Ohta T and Sutoh K (1994) Isolation of Dictyostelium discoideum cytokinesis mutants by restriction enzyme-mediated integration of the Blasticidin S resistance marker. Biochem. Biophys. Res. Comm. 205(3):1808-1814

    Bento, FM (2004) Over expression of the selectable marker Blasticidin S deaminase gene is toxic to human keratinocytes and murine BALB/MK Cells. BMC Biotechnol. 4 (29):1-10 PMID 15575952

    Izumi M. et al., 1991. Blasticidin S-resistance gene (bsr): A novel selectable marker for mammalian cells. Exp.Cell Res.197:229-33

    Lu K-T et al (2016) Ovatodiolide inhibits breast cancer stem/progenitor cells through SMURF2-mediated downregulation of Hsp27. Toxins 8(5):127

    Kim H et al (2014)  A co-CRISPR strategy for efficient genome editing in Caenorhabditis elegans. Genetics 197(4):1069-1080  PMID 24879462

    Kimura M, Takatsuki A, Yamaguchi I (1994) Blasticidin S deaminase gene from Aspergillus terreus(BSD): A new drug resistance gene for transfection of mammalian cells. Biochim. Biophys. Acta. 1219(3):653-65 PMID 7948022

    Svidritskiy E, Ling C, Ermolenko DN, Korostelev AA (2013) Blasticidin S inhibits translation by trapping deformed TRNA on the ribosome. PNAS 110(30):12283-12288 PMID 23824292

    Takeuchi S, Hirayama K, Ueda K, Sakai H and Yonehara H (1958) Blasticidin S, a new antibiotic. J. Antibiot. 11(1):1-5 PMID 13525246

    Yamaguchi I et al (1990) Expression of the Blasticidin S deaminase gene (bsr) in tobacco: Fungicide tolerance and a new selective marker for transgenic plants. Mol. Gen. Genet (2):332-334 PMID 2250657
    Protocols

    Blasticidin S HCl Kill Curve Protocol

    Background: Blasticidin S HCl is a nucleoside antibiotic derived from Streptomyces griseochromogenes and is routinely used as a selective agent for bacterial and mammalian cells that have been transformed or transfected with plasmids containing Blasticidin resistance genes, namely bsr and BSD. Before stable transfected cell lines can be selected, the optimal Blasticidin S HCl concentration needs to be determined by performing a kill curve titration. The optimal concentration of Blasticidin S HCl suitable for selection of resistant mammalian clones depends on the cell line, medium, growth conditions, and the quality of Blasticidin S HCl, but typically lies between 1 µg/mL - 30 µg/mL. Because of these variables, it is necessary to perform a kill curve for every new cell type and new batch of Blasticidin S HCl.

    Preparation and storage of Blasticidin S HCl solution:
    • Prepare stock solution of 10 mg/mL and aliquot into volumes appropriate for individual, one time usage.
    • Stock solutions can be stored at 4°C for up to 2 weeks (as well as media) and up to 8 weeks at - 20°C.

    Protocol:
    1. Seed cells of the parental cell line in a 24-well plate at different densities (50,000 – 100,000 and 200,000 cells/ml) and incubate the cells for 24 hours at 37°C.
    2. Remove medium and then add medium with varying concentrations of antibiotic (0, 5, 10, 15, 20, 25, 30, 35, 40, 45, and 50 μg/ml) and incubate at 37°C.
    3. Refresh the selective medium every 3-4 days and observe the percentage of surviving cells over time (e.g. by EMA vs Hoechst staining or MTT assay).
    4. Determine the lowest concentration of antibiotic that kills a large majority of the cells within 14 days. This concentration should be used for selection of a stable transfected cell line.
    5. If necessary, repeat the experiment to narrow the antibiotic concentration range.

    Plasmid DNA Transfection Protocol

    Background: Once the appropriate antibiotic concentration to use for selection of the stable transfected cells has been determined by performing a kill curve, the next step is to generate a stable cell line by transfection of the parental cell line with a plasmid containing the gene of interest and an antibiotic resistance gene.

     Protocol:

    1. Seed the parental cell line in 24-well plate and incubate for 24h at 37°C.
    2. Transfect the parental cell line the next day at 80% confluency with the construct (e.g. using calcium phosphate etc…) and include a sample of untransfected cells as a negative control. Incubate at 37°C in C02.
    3. After transfection (6h to 24h depending on the transfection method used), wash the cells once with 1X PBS buffer and add fresh medium containing the selection antibiotic to the cells. Use the appropriate antibiotic concentration as determined from the kill curve.
    4. Check, refresh, and expand the cells in selection medium every 2-3 days until you have enough cells for limited dilution (confluency in T25 flask or 10 cm dish).

     

    QC

    Seed 24-wells with insert and determine the transfection efficiency by immunostaining:

    1. Grow cells on insert in a 24-well plate until well is confluent.
    2. Remove medium and wash cells with 1X PBS.
    3. Fix cells with methanol or paraformaldehyde and wash with 1X PBS.
    4. Add primary antibody in 24-well against protein of interest and incubate at 37°C for 1 hour (depending on antibody).
    5. Wash cells with 1X PBS.
    6. Add secondary antibody in 24-well and incubate at 37°C for 1 hour depending on antibody).
    7. Wash with 1X PBS.
    8. Remove insert from 24-well plate and affix to microscopy slide with nail polish or other suitable adhesive.
    9. Determine the percentage of transfected cells with fluorescence microscope.
    Click here for PDF version

    Selection of Stable Transfected Cell Lines Protocol

    Background: Once the cells have been successfully transfected, the next step is to seed and select the transfected cell line in a single 96-well plate to select pure colonies by limited dilution as outlined below:

    Protocol:

    1. Seed the transfected cells in 96-well plates in 10% conditioned medium
      • 2x96 well plate with 0.1 cell per well
      • 2x96 well plate with 0.5 cell per well
      • 2x96 well plate with 1 cell per well
    2. Incubate the cells for 24h.
    3. Remove medium and add conditioned selection medium containing selection antibiotic at the pre-determined concentration required for your cell line. Incubate 96-well plates at 37°C with C02.
    4. Check the plates every day for colonies. Colony formation depends on proliferation rate of the cell line and can take anywhere from 3 days to 1 week.
    5. Refresh selective medium every 3-4 days until colonies appear.
    6. Select the wells with only one single colony. Make sure colonies are not growing in clumps as they will be less sensitive to the antibiotic.
    7. When a well contains a single colony, transfer the colony to a 24-well in selection medium and so on until you have enough cells for freezing and storage in liquid nitrogen. Use the appropriate antibiotic concentration as determined from the kill curve.

     QC

    Seed 24-wells with insert for an immunostaining to determine percentage of cells expressing the gene of interest to be able to identify a 100% pure clone. You can also use Western blotting, flow cytometry or another technique depending on the cell line used.

    Seed 24-wells with insert and determine the expression level of the gene of interest by immunostaining:

    1. Grow cells on insert in a 24-well plate until well has confluent growth.
    2. Remove medium and wash cells with 1X PBS.
    3. Fix cell with methanol or paraformaldehyde and wash with 1X PBS.
    4. Add primary antibody in 24-well against protein of interest and incubate at 37°C for 1 hour (depending on antibody).
    5. Wash cells with 1X PBS.
    6. Add secondary antibody in 24-well plate and incubate at 37°C for 1 hour (time depends on antibody type).
    7. Wash cells with 1X PBS.
    8. Remove insert from 24-well plate and affix to microscopy slide with nail polish or other appropriate adhesive.
    9. Determine the percentage of transfected cells with fluorescence microscope.